GASKET: 3MM Cascading 7.5CC BLOW / DRAW for Single Tuning Table | MasterHarp

GASKET: 3MM Cascading 7.5CC BLOW / DRAW for Single Tuning Table

This cascading slot gasket will work for both BLOW AND DRAW plates on the single table.

On the single table you simply spinĀ the gasketĀ around using the center hole to change plates configuration. It's really quite easy and fast. This gasket works well with reed plates where there are an abundance of slots and holes in the plate.

$43.20

Status message

  • 20% HOLIDAY DISCOUNT APPLIED!
  • Thank You!