GASKET: 3MM Cascading 7.5CC BLOW for Master Tuning Table | MasterHarp

GASKET: 3MM Cascading 7.5CC BLOW for Master Tuning Table

This is the cascading 7.5 the center to centerĀ gasket used to tune BLOW PLATES on the master table.

Lee Oskar, Special 20s and Tombos are a few of the reed plates with multiple holes in the plates that will be better accommodated with this gasket. You will not have to tape the holes asĀ much to seal against the gasket.

$43.20

Status message

  • 20% HOLIDAY DISCOUNT APPLIED!
  • Thank You!